As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This in vi 100 motorized gray floor review examines a freestanding projection screen designed for standard and long throw projectors. The screen features a 100-inch diagonal display with a 16:9 aspect ratio, measuring 87 inches wide by 48.8 inches high. Two core specifications define this model: its motorized floor-rising mechanism and its 3-layer gray optical coating. The motorized housing sits directly on your floor, eliminating wall mounting and drilling. The multi-layer gray surface improves contrast and deepens black levels while supporting 4K and 8K resolutions across a 160-degree viewing angle.
- Motorized floor-rising design requires no wall mounting or drilling.
- Three-layer gray optical coating enhances contrast and deepens black levels.
- Wide 160-degree viewing angle compatible with 4K and 8K standard or long throw projection.
- Multi-control system supports app operation, voice commands, and projector USB linkage.
Good fit for
This screen suits you if you use a standard or long throw projector rated at 1000 lumens or higher. It fits home theaters where you cannot drill holes into walls or ceilings, thanks to the freestanding floor-rising base. If your room has subtle ambient light, the 3-layer gray surface helps maintain contrast. It also accommodates wider seating layouts with its 160-degree viewing cone and integrates into smart setups using voice or app controls.
Who can skip it
You should skip this screen if you own an ultra-short throw (UST) laser projector, as the listing specifies it is incompatible with UST units. Do not choose it for brightly lit rooms requiring true ambient light rejection, because this gray material is not an ALR screen. You should also look elsewhere if your standard throw projector outputs under 1000 lumens, since lower output cannot overcome the darker gray optical surface.
Verdict
The IN&VI 100-inch motorized floor-rising screen provides drill-free setup and improved black levels for standard throw projectors in dim to mildly lit rooms. It delivers reliable contrast and modern smart controls, provided you do not pair it with an ultra-short throw model.
Key Specifications and Practical Everyday Impact
Screen Material: 3-Layer Grey Optical Coating
This surface uses tinted layers to deepen black levels and preserve picture contrast in spaces with subtle ambient light. It helps you keep shadow details visible without fully blacking out your room. You benefit if you watch movies in mixed lighting conditions. When shopping, compare gray optical surfaces with matte white screens, which reflect more overall light but wash out faster under room lighting.
Projector Compatibility: Standard / Long Throw
This design pairs strictly with projectors placed several feet away from the surface. It does not support ultra-short throw models, which sit directly underneath and require specialized tensioning to prevent visual distortion. You benefit if you ceiling-mount or shelf-mount your projector at standard distances. Compare throw compatibility across screens to ensure the surface geometry matches your hardware placement before setting up your viewing room.
Viewing Angle: 160°
A 160-degree viewing angle provides a consistent image without major brightness drop-off when seated off to the side. You can place seating across a wider area without viewers experiencing faded colors or dim corners. This suits households that host group sports or movie nights. When evaluating home theater gear, compare this with narrower 120-degree directional screens or wider 178-degree television panels to gauge room coverage.
Recommended Projector Output: 1000+ Lumens
The screen requires a projector outputting at least 1,000 lumens to deliver vibrant pictures through its gray tinted surface. Because gray material absorbs some ambient illumination, adequate projector light output ensures highlights stay punchy. You benefit if you own a standard home theater projector with solid output. When comparing equipment, weigh screen fabric against projector lumen ratings, as low-output portable models look muddy on darker composite fabrics.
Design and Physical Build Specifications
The IN&VI motorized floor-rising screen uses a freestanding pull-up layout. According to the listing, this electric format requires no drilling or wall mounting. You set the unit directly on the floor, which gives you flexible placement options across your home theater room. The specifications list a white finish for the exterior casing. The display surface spans 87 inches in width and 48.8 inches in height, providing a 100-inch diagonal viewing area in a standard 16:9 aspect ratio. Because the screen retracts downward into its base, you can deploy it in front of windows or media cabinets without altering your room structure.
For the projection surface, the design relies on a composite structure featuring a 3-layer grey optical coating. According to the listing, this material supports 4K and 8K content while maintaining a wide 160-degree viewing angle. The screen is engineered exclusively for standard and long throw projectors and requires at least 1,000 lumens, making it incompatible with ultra-short throw models. For system management, the built-in multi-control setup lets you operate the screen through a smartphone app, voice control, or a direct USB linkage with your projector.
Setup Requirements and Everyday Operation
Setting up this screen centers on pairing it with compatible projection equipment in your room. The unit is engineered exclusively for standard and long throw projectors, meaning you cannot pair it with ultra-short throw (UST) laser projectors. For solid image visibility on the grey composite surface, the specifications recommend a projector brightness output of at least 1,000 lumens. The screen surface supports native 4K and 8K projection feeds.
Everyday operation relies on the built-in smart multi-control system. You can operate the motorized rising screen using a mobile app, voice control prompts, or a direct USB linkage with your projector. The USB linkage synchronizes screen movement directly with your hardware. It raises the display automatically when you power the projector on, and retracts it when you turn the projector off. These automated options give you hands-free control without managing separate remotes during routine use.
For daily viewing across your room, the 160-degree viewing angle allows you to place seating across a wide perimeter while preserving picture quality. The grey surface also provides mild ambient light improvement by reducing stray light reflection during regular use. When you finish watching, the electric mechanism lowers the screen completely back into its casing, keeping your floor space unobstructed.
Pre-Purchase Considerations and System Requirements
Before adding this screen to your entertainment system, verify your hardware and room environment. You need a dedicated standard or long-throw projector, as the surface does not support ultra-short throw models. For reliable clarity, ensure your projector delivers at least 1,000 lumens. The unit includes app, voice, and USB linkage options, so check that your setup has accessible power and wireless connectivity for multi-control automation. Because the gray soft material is not a full ALR surface, it manages subtle ambient light best in dim spaces rather than sunlit rooms. Maintain the 3-layer coating by keeping the housing free of dust before retracting the motorized fabric. Within the wider TV and projector market, this floor-rising design suits renters and multi-use spaces who want a retractable 100-inch 8K-ready display without committing to fixed wall installations or traditional flat-panel televisions.
Check before you buy
- Confirm your projector uses a standard or long-throw lens, not an ultra-short-throw system.
- Verify that your projector outputs at least 1,000 lumens for proper image performance.
- Measure floor space to accommodate the 87-inch wide and 48.8-inch high screen dimensions.
- Ensure your setup location supports USB trigger cables or wireless smart app connectivity.
IN&VI 100" Motorized Floor Rising Screen
Best for: Standard-throw setups requiring portable motorized screens
- Diagonal Size
- 100"
- Screen Type
- Floor Rising
- Projector Compatibility
- Standard / Long Throw
- Aspect Ratio
- 16:9
- Screen Material
- 3-Layer Grey Optical Coating
- Viewing Angle
- 160°
This freestanding 100-inch motorized floor-rising screen uses a 3-layer gray surface with a 160-degree viewing angle. It retracts into its base, eliminating wall drilling. The gray coating improves black levels under mild ambient light for standard and long-throw projectors. You get app operation, voice control, and projector USB sync, making it suitable for dedicated or flexible home theater setups.
- Motorized floor-rising setup requires no wall mounting or drilling
- 3-layer gray optical coating improves black levels and contrast
- Wide 160-degree viewing angle supports 4K and 8K content
- Smart control options include app control, voice commands, and USB linkage
- Incompatible with ultra-short throw laser projectors
- Surface reduces mild reflection but is not a true ALR screen
- Requires a projector outputting at least 1,000 lumens
- You use a standard or long-throw projector with at least 1,000 lumens.
- You need a motorized screen without mounting hardware or drilling holes.
- You want app, voice, or projector-synced motorized deployment.
- You project with an ultra-short throw unit.
- You require full ambient light rejection for high-brightness rooms.
Verdict: IN&VI 100-Inch Motorized Floor Rising Gray Screen fits standard-throw projector owners seeking motorized floor deployment and enhanced contrast without permanent wall installations.
Specifications side by side
| Spec | IN&VI 100" Motorized Floor Rising Screen |
|---|---|
| Diagonal Size | 100" |
| Screen Type | Floor Rising |
| Projector Compatibility | Standard / Long Throw |
| Aspect Ratio | 16:9 |
| Screen Material | 3-Layer Grey Optical Coating |
| Viewing Angle | 160° |
| Mounting Type | Floor Freestanding |
| Resolution | 8K |
| Size | 100-Inch |
| Use | Home Theater |
| Width | 87 inches |
| Height | 48.8 inches |
| Color | White |
| Model | Long/Standard throw 100 Inch/16:9 |
Frequently asked questions
Can you use an ultra-short-throw projector with the IN&VI 100-inch screen?
No, this screen does not support ultra-short-throw models. The product specifications rate the screen exclusively for standard-throw and long-throw projectors. Ultra-short-throw optics cast light upward at steep angles, which requires tensioned or specialized pet-grid surfaces rather than this unit's standard optical layout.
Does the IN&VI 100-inch motorized screen support 8K resolution?
Yes, the screen lists support for up to 8K resolution. The smooth optical surface structure preserves high-density pixel grids without creating visible texture patterns or moiré distortion. This allows you to pair modern 4K or 8K home theater projectors with the display and retain crisp image detail across the entire viewable area.
What are the exact dimensions of the IN&VI 100-inch projection screen?
The viewing surface measures 87 inches wide by 48.8 inches high. This matches a standard 16:9 widescreen aspect ratio with a 100-inch diagonal measurement. Measuring your wall clearance and floor space against these dimensions helps you confirm adequate overhead clearance and side spacing before you place the housing.
Does the IN&VI motorized floor-rising screen require permanent installation?
No, this unit does not require permanent wall mounting or ceiling hanging. It features a motorized floor-rising mechanism that rests directly on level ground. You simply place the base casing on your floor or entertainment console, and the screen elevates upward under motor power whenever you want to watch content.
What room setup is the IN&VI 100-inch motorized screen best for?
This screen is best for home theater spaces using standard-throw projectors where you cannot mount fixtures permanently. The motorized floor configuration allows flexible placement, letting you deploy a large 100-inch display during viewing sessions and retract it into the casing when you need to keep your living space clear.
What color is the casing on the IN&VI 100-inch motorized screen?
The manufacturer specifications list white as the color for this model's exterior housing. A white chassis blends discreetly against light-colored baseboards, light flooring, or media furniture. This clean finish helps keep the mechanical housing visually unobtrusive in your room when the motorized screen stays lowered in storage mode.
See also
Prices and specifications above are read from the product page and can change without notice. Scores are out of 10, based on listed specifications and buyer feedback; nothing on this page comes from handling the product.
